![]() |
![]() |
![]() ![]() ![]() ![]() ![]() |
|
|||||
![]() |
|
|
The KEM-734 can be connected to a sensor
that outputs an electrical pulse signal in
order to count and record the pulse signal.
Either a 1-day or a 7-day chart can be used
with the KEM-734. |
|
Components | Unit uses a solenoid and ratchet to drive the pen on a comma-shaped cam; count starts again from 0 when 100 pulses have been reached. |
Measurement range | 0 to 100 pulse count |
Power source | 3 V DC (two D-cell batteries), 100 mA |
Clock power | One C-cell battery |
Standard components | Recorder only |
Size/weight | Approx. 327 × 141 × 240 mm, 4.0 kg |
![]() ![]() ![]() ![]() ![]() ![]() |